Mobile small rocking bed

      IntroductionThe shaking table is one of the main equipment for gravity separation. It is widely used in the separation of tungsten, tin, tantalum, niobium, gold and other rare and precious metal ores....

      • Details

        Mobile small rocking bed

        Introduction

        The shaking table is one of the main equipment for gravity separation. It is widely used in the separation of tungsten, tin, tantalum, niobium, gold and other rare and precious metal ores. It can be used for roughing, concentrating, sweeping and other operations to separate coarse sand (2-0.5mm), fine sand (0.5-0.074mm), ore mud (-0.074) and other different particle sizes. It can also be used to separate iron, manganese ore and coal. When processing ores such as tungsten and tin, the effective recovery particle size range of the 6-S fiberglass shaking table is 2-0.22 mm.


        Definition

        The ore dressing shaking table can make the ore particles move in different directions according to their density and particle size, and fan out along the diagonal from the feed trough, and discharge along the edge of the bed in turn. The discharge line is very long and can accurately produce a variety of products of different qualities, such as concentrate, sub-concentrate, medium concentrate and tailings.


        The ore dressing shaker is used as a re-selection equipment and has been widely used in the separation of minerals such as placer gold, mainly for gold or coal selection.


        Ore dressing shaker classification: ore sand ore dressing shaker, ore mud ore dressing shaker, FRP ore dressing shaker, 6-S ore dressing shaker, LS ore dressing shaker, etc.


        Influencing factors

        Asymmetry of shaking table motion

        It has a great influence on the selective transport of ore particles in the longitudinal direction and the looseness of the bed. Appropriate asymmetry requires both good selective transport performance and sufficient looseness of the bed. For coarse-grained materials that are difficult to loosen and easier to transport, the asymmetry can be smaller, and for fine-grained materials that are easier to loosen but more difficult to move, the asymmetry is larger.


        Stroke and stroke frequency

        They directly determine the speed and acceleration of the bed surface. Therefore, they also have a great influence on the loose stratification and selective transport of the bed. The optimal stroke and stroke frequency should make the bed well separated and stratified, and have strong selective transport capacity. For coarse-grained materials, selection operations and heavy loads, a large stroke and a small number of strokes are used. The general stroke is 16-30 mm and the number of strokes is 200-250 times/min. For fine-grained materials, roughing operations and light loads, a small stroke and a large number of strokes are used. The general stroke is 8-10 mm and the number of strokes is 250-300 times/min.


        Water volume and slope


        They both affect the lateral water flow velocity and water layer thickness on the bed surface, and determine the speed of lateral transportation of ore particles and the size of the cleaning effect. Therefore, they are factors that are often adjusted during operation. Increasing the slope can reduce the amount of water, and vice versa. Increasing the amount of water and reducing the slope can make the water layer thicker. During operation, the amount of water and the slope must be well matched. For coarse-grained materials, difficult-to-select materials and selection operations, a larger flow rate and a thicker water layer are required, and a small slope and a large water system should be adopted. For fine-grained materials, easy-to-select materials or roughing operations, a larger flow rate and a thinner water layer are required, and a large slope and a small water system should be adopted. The inclination angle is generally 0-10 degrees, and the water volume is 20-50 liters/minute.


        Feed volume and feed concentration


        Both affect the stratification and transportation speed. Too large a feed volume will make the bed too thick, the stratification worse, and the transportation speed increase, thereby increasing the tailings grade and reducing the recovery rate. Too small a feed volume will greatly reduce the processing capacity. If the concentration is too high, sand piles will appear, and if the concentration is too low, grooving may occur. The feed volume and concentration should be well matched. The principle is to select the best feed concentration within the allowable feed volume load range. Generally, the feed concentration is 15%-25%, with a high value for coarse particles and a low value for fine particles. When processing sand ore above 0.2 mm, the production capacity is 0.7-2.3 tons/unit-hour, and when processing fine particles below 0.2 mm, the production capacity is 0.2-0.5 tons/unit-hour.


        Feed particle size and shape


        They affect the accuracy of sorting by density. For this reason, grading, desludging and de-coarsening before selection are very necessary. Round and heavy mineral particles not only interfere with the sorting of fine particles, but also easily lose in the tailings. If the coarse and round ones are gangue, it is beneficial to sorting. Fine mineral mud is not easy to settle and easily loses in the tailings. The graded materials have uniform particle size, easy operation and adjustment, and reasonable load distribution of coarse and fine shaking tables, which is conducive to improving production capacity.


        Related Cases

      ? 2011-2024 équipement métallurgique Cie., Ltd de Jiangxi Mingxin.
      主站蜘蛛池模板: 久久久久久国产精品mv| 国内自产少妇自拍区免费| 国产精品午夜电影| 亚洲欧美日韩中文字幕久久 | 国产草草影院ccyycom| 人间**电影8858| jizz国产视频| 特级aaaaaaaaa毛片免费视频| 日本亚洲精品色婷婷在线影院| 国产精品秦先生手机在线| 亚洲欧洲日本在线| 12至16末成年毛片高清| 男人桶女人视频30分钟看看吧| 日日橹狠狠爱欧美超碰| 国产真实乱子伦精品视频| 亚洲理论电影在线观看| 91香焦国产线观看看免费| 欧美日韩国产不卡在线观看| 国产精品成人一区无码| 亚洲国产成人久久综合区| 日本一二三精品黑人区| 日韩a一级欧美一级| 国产91精品一区二区视色| 九九久久久久午夜精选| .天堂网www在线资源| 校花的好大的奶好爽漫画| 国产精品成人无码久久久久久| 亚洲国产成人精品无码区二本| 欧美老少配xxxxx| 日本三级香港三级人妇99| 国产在线精品香蕉麻豆| 久久99精品国产麻豆宅宅| 精品无码国产一区二区三区av| 成人毛片18女人毛片| 人妻无码一区二区三区四区| 91在线老师啪国自产| 欧美猛交xxxxx| 国产无遮挡又黄又爽在线视频| 亚洲乱码一区二区三区在线观看 | 国产高清av在线播放| 亚洲一级毛片免费在线观看|